Miaosheng（Superlucky）Mall
Inflation pump
Inflation pump
Regular price
GH₵1,200.00
Regular price
GH₵761.25
Sale price
GH₵1,200.00
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
FreeLionVon SUP inflation pump, a 50 PSI two-stage high-prure and low-prure all-in-one inflation pump, suitable for inflating SUP, kayaks, air mattres, tents, swimming rings, car tires, motorcycle tires, bicycle tires, etc.Product weight: 2150g Shell material: ABS Power supply mode: 12V DC car connector.The maximum adjustable prure of this product is 0-50 PSI, 0-3.1 Bar.
5 inflation modes to choose from; The first mode is SUP paddle board mode, which outputs 1-20PSI to inflate SUP paddles, kayaks, assault boats, boats, inflatable tents, etc.The second mode is low-prure mode, with an output of 0.4-0.8 PSI and a prure of about 5.5 kPa, which can inflate inflatable beds, air cushions, inflatable swimming pools, swimming rings, etc.In this mode, it is set to automatically shut down after 3 minutes of use, and can be restarted if necary.
The third mode of car tire inflation mode: outputting 0-3.1 Bar with a prure of approximately 50 PSI, suitable for all household cars, SUVs, and other car tires.Not applicable to truck tires.The fourth mode of motorcycle tires: outputting 30-50PSI air prure, suitable for motorcycle tires.The 5th inflation mode bicycle tire; Output 30-50PSI air prure, suitable for bicycle, mountain bike tires, and other types of bicycle tires.Not suitable for road bicycle tires.If there is no operat
Prure reset to zero setting: If the prure is not zero before use and is not connected to any inflation devi, please pr the+- buttons simultaneously for about 3-5 seconds, and the prure v will be automatically calibrated.Attention: Due to the lack of unified interfa standards for various types of pulp boards, if the nozzle is incompatible when using inflatable pulp boards, please repla the two transparent rubber rings on the nozzle.
Usage: 1. Connect the trachea. 2. Insert the 12V DC head into the car cigarette lighter and connect it to the car power supply, then start the car engine. 3. Pr the power button to turn on the devi, select the desired mode, and set the prure v. 4. Pr the power button on to inflate.
